You can download AnkerWork App from the App Store or Google Play Store on your smartphone to enhance your experience. 

You can follow the steps given below to connect your PowerConf S500 to AnkerWork app.
 

1. Connect your PowerConf S500 to your Phone via Bluetooth.
2. Download the AnkerWork app from App Store or Google Play Store on your phone.
3. Open the AnkerWork app and choose PowerConf S500 to connect.

AnkeWork APP Features: 

1. Get the PDF scanning feature by tapping on "Note" at the bottom of the screen.

2. Check the battery level on your PowerConf S500.

3. Choose between different modes:

Standard Mode to pick up all sounds from the near end. 

Broadcast Mode to restore and deliver original sounds by turning the speaker off (you will not hear the far end anymore when in this mode).

4. Turn the indicator light and prompt tone on/off by going to Settings > Indicator Light / Prompt Tone.

5. Set the Auto Power Off time from 5 minutes to 60 minutes by going to Settings > Auto Power Off.

6. Check firmware update.

Note: You can download the AnkerWork software for PC or macOS at software.ankerwork.com to make updating the firmware fast and simple.

If you have additional questions, please contact us for further assistance.