Hi AnkerWork B600 User,
Thank you for choosing AnkerWork. Here are some tips on how to get the most out of your Ankerwork B600 All-in-One Video Bar:
Download the AnkerWork software and keep the firmware up to date:
You can download the AnkerWork software at software.ankerwork.com to customize settings according to your preference.
1. Set resolution, field of view, zoom in and out , and enable anti-flicker in the Device section.
2. Customize image settings (brightness, sharpness, saturation, and contrast ratio) in the Image section to ensure a consistent image quality in different environments.
3. Customize light settings(brightness, color temperature and light modes ) in the Light section to make sure you look bright and professional in a low light use environment.
4. Get help by clicking the question mark located on the left-top corner.
5. Update the Video Bar's firmware.
We will release new firmware regularly to optimize the user experience. To get the best performance, you are strongly recommended to always keep the firmware of your AnkerWork B600 up to date.
Best Monitor Partener:
This product is designed for monitors. The size and weight of this All-in-One Video Bar is relatively overloaded for a laptop. To ensure a more secure installation, we recommend installing the Ankerwork B600 on a monitor. You can also mount the video bar onto a tripod with a 1/4 inch thread.
Good Enhance of Your Look in Low Light:
The edge light is is designed for using in relative ambient low light environment to enhance the brightness of your face. Its brightness is not as high as professional lamps. Therefore, we only recommend turning on the edge light when light conditions are below 30 lux. When using PowerConf B600 in situations with bright light, the auto-light-correction and white balancing features are powerful enough to ensure proper brightness and color.
Note: Image color can be affected by ambient light conditions as well.If you are using the product in an environment with frontal glare or a strong backlight, you are suggested closing the curtains or using a professional desk lamp to ensure consistent nature and clear image quality.
Tighten the Joint:
To make sure the video bar can be mounted onto the monitor steadily, please make sure the joint between the video bar and the clip is tightened before you install the product. You can get specific steps from this How-To video: https://www.youtube.com/watch?v=0Ezw09NiEAQ&t=8s
Two USB connections required:
Since this is an All-in-One bar, to ensure it works correctly, two USB connections are required. Please connect the video bar with the power adapter via the "Power" port and with the computer via the "Type-C" port.
Don’t forget that AnkerWork B600 All-in-One Video Bar comes with an 18-month warranty and hassle-free customer service, so we’re here to help if you have any questions or encounter any issues. You can contact us via the AnkerWork software "help" page or email support@ankerwork.com directly and we'll respond within 24 hours.
Regards,
The AnkerWork Team
