There are two ways to install AnkerWork B600.
 

Option A: On Top of Your Monitor
 

Unfold the clip so it fits over the top of your monitor. To secure the clip, press it against the back of your device. 
 

Adjust the video bar up or down, or rotate it to your preferred position. 
 

If the joint between the video bar and the clip is not tight enough, tighten the screw at the base with the built-in handle or use a flathead screwdriver (not included).
 

<img height="170" src="https://lh3.googleusercontent.com/tHzLQDFd-I-SYnAhcgvzb18wWQWkz1szYDcxwIW2cel95x6LCtK7aqEddf3AQ81EPvzakcBpulhohtERYu4amuZNpA1nLfZIzxQRcK9PcHx2bDPqYvnhDA4Her6HWFuYSpkXdJdaHiI9pT_cs7siDPVdmFxcF-s9U84XS4PThSW7VzXr5p0Mg93HmXiK8Q" width="378"></img>
  
Option B: On a Tripod on Your Desk
 

With the clip folded in, mount the video bar onto a tripod (not included) with a ¼ inch thread.
 

<img height="261" src="https://lh3.googleusercontent.com/WqYX4XqOhxXJbFwMKBBMULJaM2zVtzy_OIXe50I9-IEOIzILCg6EmC8s3yUQPTP78naj4dME69wYL8OcUbdSr1rTHNrzKWMPNqcWymMcNao4-aA40ahcjcg_6p7Fq9ZCZRPufSFENrJE8S95lUN7FEgbsgsvg-t7KxD6GUUOGF02UhgItuAKWhQvOUibGQ" width="227"></img>
  
Note: We recommend installing AnkerWork B600 on your monitor. If you are using a laptop, we recommend using a tripod for a more secure installation.
 

If you have additional questions, please contact<a href="https://support.ankerwork.com/s/contact-us" style="text-decoration: none;" target="_blank"> us</a> for further assistance.