Step 1: Connect to a Computer

- Plug the USB-C connector from the included USB-C cable into the USB-C port on the webcam.

- Plug the USB-A connector into an available port on your computer. If there is no USB-A port on your computer, you need to use a USB-A to USB-C adapter (not included) to make the connection.

Step 2: Select the Webcam

Go to the settings of the connected device and software, and then select PowerConf C202 as the camera and microphone inputs.

Note: The LED will only light up when the privacy cover is open and the webcam is being used by the software.