Before pairing the remote with the BR300 Video Bar, please ensure the remote is ready:

1. Press to open the battery cover.

2. Insert two new AAA batteries (not included) matching the polarity (+/-) indicated, and close the battery cover.

• Your remote is already paired with the video bar and ready to use when powered on. 
• You may need to manually pair the remote with the video bar when replacing a lost remote or when experiencing any control problems:

1. Turn on the video bar and make sure that you see an image output.

2. Press and hold "=" until the LED on the remote turns steady red. This indicates that the pairing history has been cleared. 

3. Insert a paperclip (not included) into the reset key and push gently. The LEDs on the video bar will light up in blue in sequence during the pairing process. 

4. Press and hold "=" until the LEDs on the video bar flash blue. This indicates that the pairing is completed.

If you have additional questions, please contact us for further assistance.