1. What settings can be controlled on the AnkerWork app?

See article .

 

2. How do I upgrade firmware?

See article .

 

3. How do I connect PowerConf to my devices?

• Mobile devices: Bluetooth connection. (see article)
• Computers and laptops: USB and Bluetooth connection. USB is recommended for a more stable connection. (see article )

 

4. How do I set my PowerConf as the default audio device on my Windows computer?

• Right click the volume icon in the lower right corner of the desktop.
• Select "Open Sound Settings."
• Select PowerConf for "Input" and "Output."

 

5. How do I set my PowerConf as the default audio device on my Mac computer?

• Click "System Preference" in the top left corner of the desktop.
• Choose a sound output device.
• Select PowerConf for "Input."
• Select PowerConf for "Output."

 

6. How do I set up PowerConf with my meeting software?

• Go to the audio options on your conference communication tool.
• Select PowerConf for the microphone.
• Select PowerConf for the speaker.

 

7. How do I improve the microphone's ability to pick up voices on my speakerphone?

See article .

 

8. Why is there no sound coming out from the speaker when it is connected at the same time to two devices through USB and Bluetooth?

• Make sure PowerConf is selected as the default output device.
• Press the "Play" button for two seconds to switch between Bluetooth and USB modes.

 

9. How do I reset PowerConf?

When the PowerConf is powered on, press and hold down the Bluetooth button and then press and hold the Volume"-" button until the square indicator flashes four times.

 

10. How do I check the power level on my PowerConf?

You can:

• Check the power level on the AnkerWork app.
• Click the "Power" button if the speakerphone is already on. The square indicator will show the remaining power.

 

11. Can the USB-A charge other devices?

Yes, it can charge other devices, but will stop charging when the power level is less than 10%. 

 

12. Can it support "daisy-chain"(two speakerphones connected to one host device at a time)?

No，it can't.

 

13. Is it compatible with a landline telephone system?

No，it isn't.

 

14. Will it turn off automatically?

If there are no connections or signals to PowerConf or any activity in the customized settings of the AnkerWork app, it will automatically power off after 30 minutes.

 

15. What are the differences between PowerConf, PowerConf S3, and PowerConf+?

See article .