- The remote is already paired with the video bar and ready to use when powered on.

- You may need to manually pair the remote with the video bar when replacing a lost remote or when experiencing any control problems:

1. Turn on the video bar and make sure that you see an image output.

2. Press and hold "=" until the LED on the remote turns steady red. This indicates that the pairing history has been cleared.

3. Insert a paper clip (not included) into the reset key and push gently. The LEDs on the video bar will light up in blue in sequence during the pairing process.

4. Press and hold "=" until the LEDs on the video bar flash blue. This indicates that the pairing is completed.